Daily maintenance and upkeep of aluminum alloy law enforcement boats

Aluminum alloy law enforcement boats should be regularly wiped with a soft cloth in the morning to remove water droplets left by night mist, and special attention should be paid to doors and windows, deck outfitting, and soft mats used outdoors.

1. Hull and waterline:

The cleaning of the ship's hull is generally done once a week, or when necessary. This depends on the water quality of the location where the law enforcement boat is located. Special marine cleaning liquids can be used to clean the ship's hull. However, attention should be paid to the product instructions when using them, as some cleaning liquids may have an impact on the coating on the bottom of the ship to prevent marine organisms from adhering.

2. Side window glass:

The side window glass of aluminum alloy law enforcement boats can be maintained using law enforcement boat specific glass maintenance products, which have cleaning and waterproof effects. It can penetrate into the glass capillary pores, form a surface protective film, provide clear visibility, and block water droplets from leaving marks on the glass, keeping the glass window clean every day.

3. Soft cushion:

Outdoor soft cushions should be kept as dry as possible. When not in use, they can be wrapped with a cushion cover or placed vertically in the storage compartment. After rain or cleaning law enforcement boats, the soft cushions will generally get wet. At this time, try to wipe off the moisture on the cushion as much as possible to keep it dry. If the cushion becomes dirty or has stains, you can use a law enforcement boat specific cleaning agent to clean it.

4. Hatch cover on deck:

There is a groove below the hatch cover on the deck to collect and discharge water flowing into the gaps of the hatch cover. After each ship wash, all hatch covers on the deck should be opened, cleaned, and dried. If not in use for a long time, it is better to open the hatch cover once a month and wipe the sealing strip on the hatch cover with warm cleaning solution.

5. External latch:

The locks of the cabinets inside and outside the cabin should be kept clean, tidy, and dry to prevent mold. After each ship wash, the external storage cabinets should be opened, dried, and the items inside the cabinets should be kept dry and neatly arranged. It is better to empty the storage cabinets every 120 days and thoroughly clean them. All external door locks, latches, and hinges should be kept clean, dry, and replaced annually, Latches and hinges should be lubricated every 6 months for better protection.